Please note; this product has been discontinued
Pop Up Power Outlets – Made for Australian use
When designing our homes and offices, we are faced with decisions about the smallest of details as indeed it is the trifling aspects of modern spaces that set them apart. When it comes to deciding on electrical fittings however, most people don’t look any further than the white plastic plug assuming that’s their only option.
That’s why Modern Power Solutions are revolutionising the way we access power in our kitchens, offices and other spaces.
Stylish, innovative, and accessible power access designed to meet societies growing need for readily available power and data.
MPS Pop Up Power Points feature two Australian Outlets, and two USB Charging outlets to allow users to easily charge their portable devices with little hesitation. Small portable electronic devices that use USB to charge, such as iPhones, Android phones, iPods, MP3 Players, and digital camera… can charge directly from the unit without any external transformer – designed for added convenience.
The ability for Pop Up Power Outlets to easily hide away from a simple push down, or to be extracted from a simple pull up, means they can suit most environments without being in the way of other appliances. They look stylish, and when up, or down – when hidden from use. Installation on tabletop locations allows power to be provided where it is needed most, from kitchen appliances to laptop computers, all commonly used on bench-tops.
Model: MPS V2 Colour: Stainless Steel Material: Stainless Steel
Warranty: 12 Months Australian Warranty – Lifetime parts & repair service
Installation Hole Size: 100mm (+/- 5mm)
Space required below surface: 290mm from top of surface, 100mm in diameter
Module Configuration: 2x Australian Outlets, 2x USB charging outlets [1.05a each]
Cable Length: 160cm Cable Type: H05VV-F [3x 1.5mm2] Plug: XH022B [250V 10A]
Degree Of Protection: IPX0 [against harmful ingress of water], IP2X [against access to hazardous parts and against harmful ingress of solid foreign objects]
Rated Voltage: 240V~ Rated Current: 10A Technical Model: V2SebNetPUPP
Trademark: SebNet Australian Standards for Components:
Component: USB Model: USB-2A Characteristics: I/P: 230Vac, 50Hz, 150mA O/P: 5Vdc, 2x1050mA Standard: IEC 60950-1:2005+ Am1:2009 +Am2:2013 + Australia deviation Certified: LCIE test report No. : MGE- 14NO1629VTSP- R2 Manufacturer: Cixi Mingye Communicating & Electronic Co., Ltd
Component: Cable Model: H05VV-F Characteristics: 3×1,5mm2 Standard: AS/NZS 60227.5:2003 Inc A1 Certified: SAA SAA090324EA Manufacturer: Ningbo Xuanhua Electrical Co., Ltd
Component: Plug Model: XH022B Characteristics: 250V 10A Standard: AS/NZS 3112:2011 IncA1-2 Certified: SAA SAA091261EA Manufacturer: Ningbo Xuanhua Electrical Co., Ltd
1. A hole size in the desired surface for installation is required. Check model to determine the hole size requirement. Ensure there is enough space under your installation surface, so the unit can fall freely into its hole and sit flush. Check above for model specifications.
2. Unscrew the mounting ring, feed the cable through the mounting hole, then place the unit in the hole.
3. Re-attach the mounting ring and tighten the unit to the surface. Plug the power cable into a power point.
4. The unit is ready to pull up and use!
FAQ’s [Frequently Asked Questions]:
Q. Is this model spring-loaded, and does it automatically come up?
A. No, you are required to pull the unit up manually out of the surface to allow it to ‘pop up’ and be ready to use. We have other motorised models that enable the unit to come up automatically at the push of a button.
Q. What happens if I have a fault with my unit outside of the warranty period?
A. We provide an affordable repair service, and our repair staff can usually fix or replace your unit within three business days [within Australia].
Q. Do you provide after-sales service, and how do I contact you?
A. We reply to 98% of customer emails within 24 hours, and we work to resolve each of them as soon as possible. We are based in Australia and are easy to deal with. You can contact us via phone, email or live chat.
Q. Do I need a licensed electrician to install this product?
A. No electrical work is needed to install this product. We have designed the unit with a standard Australian plug, allowing you to plug the unit into any other power point [below your installation surface].
Q. Does this product meet Australian electrical standards?
A. Yes, we have tested and certified all our products to meet SAA standards in Australia. Our test reports and certificates are available to you on request. Feel free to send us a message.
Q. What is the process for making a warranty claim?
A. We include 12 months warranty. If your product malfunctions within 12 months, we will repair or replace it for you free of charge. We will cover both [2-way] postage costs and generally resolve the issue within five business days. We keep digital records for every order, so don’t worry about keeping your transaction receipt for warranty purposes.